The advantage of the leather optical cable

Six advantages of leather cable:

1. Special bend-resistant optical fiber provides greater bandwidth and enhances network transmission performance;

2. Two parallel FRP or metal reinforcements make the optical cable have good compressive performance and protect the optical fiber;

3. The optical cable has simple structure, light weight and strong practicability;

4. Unique groove design, easy to peel off, easy to connect, simplify installation and maintenance;

5. Low-smoke halogen-free flame-retardant polyethylene sheath or flame-retardant PVC sheath, which is environmentally friendly.

6. It can be matched with a variety of field connectors and can be terminated on site.

ZR Cable integrated wiring

Seven practical skills of integrated wiring:

1. The integrated wiring system must be designed in advance, and cooperate well with the installation projects such as civil engineering, fire protection, air conditioning, lighting, etc., so as to avoid unnecessary construction conflicts.

2. When conditions permit, the weak current should go to its own weak current well to reduce the chance of electromagnetic interference. The floor wiring room and the main engine room should be arranged as large as possible for development and maintenance needs. For the network, the laying of the physical layer is crucial because it is the foundation.

3. Deploy as many points as possible, use a double-hole panel (one for voice, one for data), coordinate well with electricity, and distribute power points near the information points. Since the integrated wiring is generally a one-time project, it is relatively difficult to change the wiring after the wiring is completed, and the number of communication equipment is increasing with the development, so it is safer to arrange more.

4. Don't make the integrated wiring too ideal, and don't integrate some more dedicated networks into the integrated wiring. Integrated wiring is enough to integrate the telephone network, computer network, and building automation network.

5. With the rapid development of network equipment, it should be as open as possible when choosing a plan. Use five or more horizontal categories to ensure that data and voice can be interchanged. Vertically use optical fibers to increase logarithmic cables. For some points, there are more For buildings, fiber optic cables should be used for data backup instead of cables.

6. As the price of optical products continues to decrease, the wiring of large bays should consider placing more light points, which is beneficial to network construction.

7.When laying the DG pipe, a larger diameter should be used, and a margin should be reserved. When laying the optical cable, pay special attention to the turning radius. If the turning radius is too small, the link will be seriously lost. Carefully check each optical cable, especially the panel box of the optical contact. Some panel boxes are not deep enough. It is good when the box is installed, but the test is not good after it is installed. The reason is that the corner radius of the optical cable is too small after being installed, causing serious loss.