Outdoor ADSS optical fiber optical cable setting problem

ADSS (All-Dielectric Self-Supporting) optical fiber cable is a type of fiber optic cable that is commonly used for outdoor installations. It is designed to be self-supporting, which means that it does not require a separate support structure to be installed. However, there are certain considerations that need to be taken into account when setting up ADSS optical fiber cable to ensure its proper functioning and longevity. Here are some of the key considerations to keep in mind:

Tension: ADSS optical fiber cable is designed to withstand tension and should be installed with proper tensioning to prevent sagging. If the cable is installed with insufficient tension, it may sag, which can cause damage to the fibers or even lead to the cable breaking. On the other hand, excessive tension can also be damaging to the cable, so it is important to find the right balance.

Supports: While ADSS cable is designed to be self-supporting, it still requires supports to maintain its shape and prevent sagging. The supports should be installed at regular intervals along the cable's length, typically every 100-200 meters, and should be strong enough to withstand the cable's tension. The supports should also be positioned so that they do not cause any damage to the cable.

Clearance: ADSS cable should be installed with sufficient clearance from other objects to prevent damage. The clearance distance will depend on the specific installation environment, but typically a clearance of 1 meter or more should be maintained between the cable and any other objects.

Weather: ADSS cable should be installed with consideration for weather conditions. Extreme weather conditions, such as high winds or heavy snow, can cause damage to the cable, so it is important to take steps to protect the cable in these situations. This can include installing additional supports, adding weight to the cable, or using weatherproofing materials.

Cable Joints: When joining ADSS cable, it is important to use proper splicing techniques to ensure a secure and strong connection. The joints should be installed at a support point and should be protected from moisture and other environmental factors that could cause damage. Additionally, the cable should be tested after the joint is installed to ensure that it is functioning correctly.

Testing: ADSS cable should be tested after installation to ensure that it is functioning correctly. This can include testing for signal loss, attenuation, and other parameters, as well as checking the splices for proper alignment and strength. Regular testing and maintenance should also be performed to ensure that the cable is functioning as intended over time.

In conclusion, proper tensioning, support, clearance, weather protection, cable joint installation, and testing are all essential considerations to take into account when setting up ADSS optical fiber cable. By following these considerations, telecommunications providers can ensure that their ADSS optical fiber cable is installed correctly and functioning as intended, providing reliable and high-quality transmission capabilities for their customers.